Partial Demolition Contractor in Colorado

Sometimes you don’t need the whole building gone — just a wing, a wall, or a structural piece to clear the way for a remodel or addition. That’s where partial demolition comes in. Rocky Demolition is Colorado’s trusted partner for selective structural removal, helping homeowners, remodelers, and commercial GCs safely cut away what you don’t need — while protecting the parts that stay.

From load‑bearing walls to outdated wings, garages, decks, porches, or second‑story additions, we engineer it right, permit it properly, and execute it safely — every time. Serving Denver, Aurora, Arvada, Colorado Springs, and statewide.

Quick Reference

  
We RemoveWings • Garage or porch additions • Partial roof or second floor • Load-bearing walls • Interior sections
Who We ServeHomeowners • Remodelers • GCs • Architects
What’s IncludedEngineering plan • Permit filing • Utility re-routes • Safe tear-back • Debris haul & grade
Why RockyPE on staff • 25+ years structural experience • No damage to remaining structure
CoverageDenver • Aurora • Arvada • CO Springs & statewide
Get a Quote📞 720‑442‑1092 or Request Partial Demo

What Is Partial Demolition?

Partial demolition means removing a targeted part of an existing building while leaving the rest structurally safe and ready for renovation.

Typical examples:

  • Tearing down an old garage attached to the main house

  • Removing a porch or deck

  • Cutting back an outdated second story or bump-out

  • Removing interior load-bearing walls for an open plan

  • Separating attached units for redevelopment

When You Need Partial Demo

ScenarioWhy Do It
Open floor plan remodelKnock out a structural wall to open kitchen/dining
Garage or porch removalClear room for new addition or larger garage
Second story removalReplace aging upstairs with new code-compliant frame
Unsafe additionOld bump-out, porch, or sunroom has failed
Lot splitRemove shared garage or carport in duplex split

Example: Denver, Boulder, Aurora all require full PE oversight if you alter load-bearing parts — Rocky handles it all.

Our 7-Step Partial Demolition Process

PhaseActionWhy It Matters
1. Engineering SurveyPE maps structure, load paths, bracing needsPrevents accidental collapse
2. Permit & Utility PlanFile structural partial demo permit, manage gas/water/electrical reroutesLegal & safe
3. Build Shoring & ControlsTemp shoring or bracing for remaining sectionsHolds loads while we remove
4. Precise Tear-BackCut structural elements in controlled sequenceClean removal, no damage
5. Debris Sort & HaulSeparate concrete, wood, metal — recycle what’s cleanCuts landfill cost
6. Final Edge PrepSeal or brace exposed edges for framingReady for remodel crew
7. Deliver Logs & Close-OutProvide PE letter if required, final grade if neededPass final city inspection

Specialized Tools & Controls

EquipmentUse
PE load calc softwareConfirms safe bracing & beam sizing
Temp shoring jacksHold up roof or floor loads
Concrete saws & wall sawsPrecise cuts, no over-cuts
Demo hammersControlled takedown of walls
Roll-off binsSorted debris streams
Dust & vibration controlsProtect living areas if occupied

Cost Drivers & Typical Pricing

FactorLowHigh
Type & scopeSmall wall removalFull wing or story
Structure typeLight frameHeavy masonry or block
Access & tie-inWide open lotTight urban row home
UtilitiesSimple cutComplex gas/electric reroute
Finishing needsSimple temp wrapFull temp roof or wall close

Ballpark:
• Small interior wall: $1,500–$5,000
• Garage or porch tear-back: $4,000–$12,000
• Full second story removal: $20,000–$50,000+

👉 Line-item quote only after PE plan & permit check.

Permit & Local Compliance

CityRuleRocky’s Role
Denver CPDPartial structural demo permitFile with stamped PE plan
CDPHEReg 8 ACM & leadRequired for pre-1980s
AuroraUtility reroute if wall has linesCoordinate with Xcel, Denver Water
BoulderGreen Points if deconstructing partsSalvage plan if possible

✅ We handle it all — PE letters, city submittals, neighborhood notices if required.

Recycling & Salvage

MaterialOutcome
Concrete & brickCrushed on-site or hauled for reuse
LumberReclaimed if clean
Fixtures & doorsSalvaged for donation or reuse
ACM/leadSealed & licensed disposal
Mixed debrisSorted to maximize landfill diversion — typical 60–85% on partials

Case Study: Garage Wing Removal, Denver

• 1960s attached garage, 420 sf
• PE braced roof tie-in, removed garage only
• Utilities capped & rerouted
• Concrete slab broken & crushed for reuse
• 72% of waste diverted
• Final sign-off passed same day — new addition framed same week

Why Rocky for Partial Demo

✔ In-house PE: no structural surprises
✔ 25+ years safe structural cut-back
✔ Precise cut tools, no damage to remaining building
✔ Utility reroutes & permits handled
✔ Clean final edge — ready for your remodel crew

Need to Remove Just One Part?

📞 720‑442‑1092 or Request Partial Demo
Same-week site walk. PE plan. Clear, safe tear-back.

FAQs

Q: Will my house need extra beams after?
Maybe — we’ll design it, file it, and your framer installs permanent supports after our tear-back.

Q: Do I need to move out?
Small interior or wing? Usually no — we contain dust & secure the edge.

Q: What if asbestos is found?
We coordinate licensed removal under Reg 8, then finish the cut-back safely.